Base Pkg Billet Uniball UCA, FOX Performance Series, 2010+ 4Runner / 2007+ FJ Cruiser 2/4WD

• Includes Element Hard Parts Upper Control Arms with FK 1-inch uniballs, FK rod ends, custom 17-4 stainless steel pins, and Type III hard anodized coating
• Comes with Performance Series shocks specifically valved for the Toyota 4Runner/FJ Cruiser with 2-inch diameter bodies
• Perfect for weekend warriors, explorers, campers and anyone else needing more control in the dirt while maintaining a smooth ride on the street
• Adds 0-2” inches of front lift for a level stance
• Clears the way for larger tires
• Allows for alignment within OE specs
• A significant increase in rebound and compression damping control over factory components

• A pair of Element Hard Parts Upper Control Arms, Front and Rear Fox Performance Series Shocks
• 1005 – Billet UCA
• 983-02-051 x 2 (Front 0-2”)
• 980-24-679 x 2 (Rear 2-3”)

Q: What height do the shocks come out of the box?

A: Typically, Fox Shocks will be pre adjusted to the highest setting per application. Example if the coilover is 0-2”, our experience shows that out of the box the vehicle will net close to 2” of lift. Fine tune adjustment can be made once installed.

Q: Why does Element use 980-24-679 for the rear shock?

A: Our most common set up for the 4Runners includes the use of our rear coils that provide 2” of lift. If you are not addressing the rear with any height, we recommend using the 985-24-124 for 0-1.5” of lift.

Q: Will these shocks work on a 2wd application?

A: Yes, the shocks will work for both 2wd and 4wd applications

Q: On your arms on car adjustable?

A: Yes, although we preset the length of the arm to allow for proper alignment for most popular lift heights, the arms do allow for on the car adjustment to fine tune your alignment.

Q: What size lift will the control arm work for?

A: The control arms were designed to work with 4Runner’s lifted 1-3” over stock using a replacement coilover.

Q: Are your control arms serviceable?

A: Yes, we offer replacement / service parts for the control arms uniball and rod ends.